Teclock Dial Depth Gauge, 30mm/0.01 – DM-233 Series
Teclock DM-233 Series – Dial depth gauge with low measuring force for depth, steps work and coating thickness measurement by MSP Metrology (M) Sdn Bhd from Teclock Japan.
Features
Measure Features
Dial Depth Gauge can be used to measure depth and steps of work piece and coating thickness. Special order is applicable for contact point and base. Low measuring force type is also available, which seldom hurts work piece. Lifting lever (Option) can be mounted
Extension Rods
When all of 5 extension rods of depth gauge with extension rods are connected, it can measure the dimension of deep concavity part of bottom. (Standard dimension set up with master gauge is necessary). Measuring range 30mm Depth Gauge can be extend up to maximum 240mm
Full Specifications
| Model | Graduation (mm) | Measuring Range (mm) | Indication Error (μm) | Contact Point Form (mm) | Standard Contact Point | Measuring Force (N) | Weight (g) |
| DM-233 | 0.01 | 30 (240) | ±35 | ∅3.2 Steel Ball | ZS-034 | 2.5 or less | 315 |
