Imada Torque Load Cells Series
The Imada Load Cells, also known as “Load Transducers” or “Load Sensors” are sensor that detects force or torque and converts its magnitude into an electrical signal. Presented by MSP Metrology (M) Sdn Bhd from Imada Japan.
Features
Torque Load Cells
Various attachments can be fixed to the tip of the torque load cell to suit the samples. A flange that can be fixed to a jig or equipment, is also available.
Torque Load Cell for eZ-Connect Series
Torque Load Cell
eHT series
Torque load cell for eZ-Connect Series measures the force of twisting (turning) to the left or right. The optional jig (sold separately) is attached to the tip of the sensor to match the object to be measured. It has capacity of 10Nm. A dedicated indicator i.e., eZT or eFA plus, needs to be used.
- Designed to measure rotating/twisting force by combining the sensor with amplifier eZT (sold separately)
- A wide range of optional attachments available to suit your testing applications
| Model | Capacity |
| eHT-0.5N | 0.5N-cm** |
| eHT-2N | 2N-m |
| eHT-5N | 5N-m |
| eHT-10N | 10N-m |
** Displayed unit is in N-cm only
** You can switch N-m (N-cm) to kgf-m (kgf-cm) or lbf-in (ozf-in)
| Capacity | 0.5Nm ~ 10Nm |
| Accuracy | ±0.5%F.S. or less |
| Size | Approx. ∅38 x 138mm |
| Cable Length | Approx. 0.5 ~ 1m (Curl cable) |
Flange Type Load Cell
TFX series
Flange type torque load cell for eZ-Connect Series measures the twisting (turning) force to the left or right. It is ideal to integrate to equipment by fixing it with its equipped through holes on both sides. A dedicated indicator i.e., eZT or eFA plus, needs to be used.
- Designed to measure rotating/twisting force (torque) by combining the sensor with amplifier eZT (sold separately)
- Ideal for integration to equipment by fixing it with its equipped through holes on both sides
- Suits for measurements in limited space due to the small body
