Imada Cables Accessories for Force Gauge/Push Pull Tester
The Imada Various cables are available to connect a force gauge to an external equipment. Use them to make your measurements more convenient and extensively. Presented by MSP Metrology (M) Sdn Bhd from Imada Japan.
Features
Cables
Analog Cables
Analog cables connect to pen recorders, sequencers, and other devices with analog input terminals to enable recording of results and changes in measured values
Analog Cable for ZT
CB-118
CB-118 is analog cable used to connect ZT-AN series force gauges with analog devices such as pen recorder, oscilloscope and multi meter.
- Connects ZT-AN series force gauge with analog devices
- Enables data recording of force transition combining analog devices such as pen recorder, oscilloscope and multi meter
- Outputs sensor data through analog voltage without conversion
Analog Cable for ZT
CB-108
CB-108 is analog cable used to connect ZT series force gauges with analog devices such as pen recorder, oscilloscope and multi meter.
- Connects ZTS/ZTA series force gauge with analog devices
- Enables data recording of force transition combining analog devices such as pen recorder, oscilloscope and multi meter
Analog Cable for ZP/Z2/HTG2/DTX2
CB-104
CB-104 is analog cable used to connect ZP/Z2/HTG2/DTX2 series force gauges/torque gauges with analog devices such as pen recorder, oscilloscope and multi meter.
- Connects ZP/Z2/HTG2/DTX2 series force gauge with analog devices
- Enables data recording of force transition combining analog devices such as pen recorder, oscilloscope and multi meter
Analog Cable for DS2
CB-101
CB-101 is analog cable used to connect DS2 series force gauges with analog devices such as pen recorder, oscilloscope and multi meter.
- Connects DS2 series force gauge with analog devices
- Enables data recording of force transition combining analog devices such as pen recorder, oscilloscope and multi meter
RS232C Cables
This cable connects to an external device such as a PC or PLC and enables recording of results and changes in measured values via RS232C communication.
RS232C Cable for ZT
CB-208
CB-208 is RS232C Cable used to connect ZTS/ZTA series force gauges with PC, enabling data recording and operation from PC.
- RS232C cable to connect ZTS/ZTA series force gauge with PC
- Enables data recording and operation from PC
RS232C Cable for DST/DSV
CB-203
CB-203 is RS232C Cable used to connect DST/DSV series force gauges with PC, enabling data recording and operation from PC.
- RS232C cable to connect DST/DSV series force gauge with PC
- Enables data recording and operation from PC
RS232C Cable for ZP/Z2/HTG2/DTX
CB-204
CB-204 is RS232C Cable used to connect ZP/Z2/HTG2/DTX2 series force gauges/torque gauges with PC, enabling data recording and operation from PC.
- RS232C cable to connect ZP/Z2/HTG2/DTX2 series force gauge with PC
- Enables data recording and operation from PC
Digimatic Cables
This cable connects to the Mitutoyo Digimatic Mini Processor to enable recording of measurements.
Digimatic Cable for ZT series (firmware older than Ver.5)
CB-308
CB-308 is digimatic cable used to connect ZTS/ZTA series force gauges (firmware older than Ver.5) with Mitutoyo Digimatic printer.
- Connects ZTS/ZTA series force gauge (firmware older than Ver.5) with Mitutoyo Digimatic printer DP-1VA
- Allows for printing out measurement results
Digimatic Cable for Z2/HTG2/DTX
CB-304
CB-304 is digimatic cable used to connect Z2/DTX2/HTG2 series force gauges/torque gauges with Mitutoyo Digimatic printer.
- Connects Z2/DTX2/HTG2 series force gauge with Mitutoyo Digimatic printer DP-1VA
- Allows for printing out measurement results
Digimatic Cable for DS2
CB-301
CB-301 is digimatic cable used to connect DS2 series force gauges with Mitutoyo Digimatic printer.
- Connects DS2 series force gauge with Mitutoyo Digimatic printer DP-1VA
- Allows for printing out measurement results
Test Stand Optional Cables
This cable connects the test stand to the equipment and enables operation control by force value and activation of the overload stop function.
Force Control Cable (MX2/EMX – ZT connection)
CB-528
CB-528 is cable used to connect MX2/EMX series test stand with ZTS/ZTA series digital force gauges to activate functions of test stand such as overload prevention and force control.
- Connects MX2/EMX series test stand with ZTS/ZTA series digital force gauges
- Activates functions of test stand such as overload prevention* and force control
*It cannot guarantee complete overload prevention
Force Control Cable (MX-ZT connection)
CB-508
CB-508 is cable used to connect MX series test stand with ZTS/ZTA series digital force gauges to activate functions of test stand such as overload prevention and force control.
- Connects MX series test stand with ZTS/ZTA series digital force gauges
- Activates test stand’s functions such as overload prevention* and force control
*It cannot guarantee complete overload prevention
Force Control Cable (MX-ZP/Z2 connection)
CB-504
CB-504 is cable used to connect MX2/EMX series test stand with ZP/Z2 series digital force gauges to activate functions of test stand such as overload prevention and force control as well as to enable communication with PC via RS232C.
- Connects ZP/Z2 series with MX series test stand and PC via RS232C
- Activates test stand’s functions such as overload prevention* and force control
*It cannot guarantee complete overload prevention
Force Control Cable (MX-ZP/Z2 connection)
CB-501
CB-501 is cable used to connect MX series test stand with ZP/Z2 series digital force gauges to activate functions of test stand such as overload prevention and force control.
- Connects MX series test stand with ZP/Z2 series digital force gauges
- Activates test stand’s functions such as overload prevention* and force control *It cannot guarantee complete overload prevention
Force Control Cable (MX2/EMX-ZP/Z2 connection)
CB-704
CB-704 is cable used to connect MX2/EMX series test stand with ZP/Z2 series digital force gauges to activate functions of test stand such as overload prevention and force control.
- Connects MX2/EMX series test stand with ZP/Z2 series digital force gauges
- Activates test stand’s functions such as overload prevention* and force control *It cannot guarantee complete overload prevention
External Signals I/O Cable (MX2-CN/EMX)
CB-706
CB-706 is external signals I/O cable used to connect MX2-CN or EMX series test stand with external equipment to activate external control of the test stands.
- Connects MX2-CN/EMX series test stand with external equipment to for I/O of signals
Digimatic Cable for DS2
CB-301
CB-301 is digimatic cable used to connect DS2 series force gauges with Mitutoyo Digimatic printer.
- Connects DS2 series force gauge with Mitutoyo Digimatic printer DP-1VA
- Allows for printing out measurement results
Displacement Cables
This cable is required to connect a test stand to a measuring equipment to obtain force-displacement or torque-angle.
Displacement Cable (MX2-FA/MH2-FA/EMX-FA with firmware version 2.0 or later – ZT connection)
CB-718
CB-718 is cable used to connect MX2-FA/MH2-FA/EMX-FA with firmware version 2.0 or later series test stand with ZTA series force gauges to enable force-displacement measurement and activate functions of a test stand such as overload prevention and force control.
- Connects MX2-FA/MH2-FA/EMX-FA with firmware version 2.0 or later series test stand with ZTA series force gauge
- Activates test stand’s functions such as overload prevention* and force control *It cannot guarantee complete overload prevention
Displacement Cable (EMX-FA with firmware earlier version than 2.0 – ZT connection)
CB-728
CB-728 is cable used to connect EMX-FA with firmware earlier version than 2.0 series test stand with ZTA series force gauges to enable force-displacement measurement and activate functions of a test stand such as overload prevention and force control.
- Connects EMX-FA with firmware earlier version than 2.0 series test stand with ZTA series force gauge
- Activates test stand’s functions such as overload prevention* and force control
*It cannot guarantee complete overload prevention
External Contact Point Cables
Connects to a PLC or other device with an external contact input terminal to enable measurement of external contacts.
External Contact Point Cable for ZT
CB-808
CB-808 is cable used to measure external contact point for ZTS/ZTA/eZT digital force gauges.
- Measures external contact
- For ZTS/ZTA/eZT digital force gauges
Open End Cables
This cable is a discrete wire specification cable required for connecting measuring equipment to external devices such as PLCs and facility.
Open End Cable for ZT
CB-908
CB-908 is open end cable used to connect ZTS/ZTA series force gauges with unique equipment.
- Connects ZTS/ZTA series force gauge with unique equipment
- Allows for connection with external equipment such as PLC with 37-pin open end cable
- Offers custom cable length to meet your needs (standard 3m)
Terminal Block Cables
These cables with terminal blocks are necessary for connecting measuring equipment to external devices such as PLCs and equipment.
Terminal Block Cable
CTB-A
CTB-A is terminal block cable used to connect ZT, eZT, FA Plus2 series with external equipment.
- Allows for connection with external equipment such as PLC and liner scale DMK series (without connectors)
- Length of supplied cable: approx. 1m