Imada 180° Peel Tester IPTS-5N Series

Imada 180 Degree Peel Tester IPTS-5N offers motorized peel testers in vertical or horizontal configurations by MSP Metrology (M) Sdn Bhd from Imada Japan

p

Features

IPTS-5N

180° Peeling Tester

Peel Strength Tester has capacity of 5N and measures the peel strength of cover tapes of embossed carrier tapes that contain semiconductors and electronic components in accordance with JIS and other industrial standards. Next Series with firmware Ver. 5 or later offers improved measurement stability due to low noise, expandability with the ability to add functions on a dedicated website ((MADA-Connected.com), and the convenience of downloading various software and instruction manuals.

  • Designed for peeling test of embossed carrier tape complying with IEC and JIS standard
  • High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
  • User-friendly operation with easy sample setup and one-click operation (simply press the START button to start the test and record data)
  • Allows accurate analysis capturing small changes with high sampling rate (2000Hz) and visual analysis with graph overlay function (up to 5 graphs) by the supplied graphing software
  • Next Series (Firmware Ver.5 or later) equips extended functions such as additional functions and software downloads from IMADA download site

IPTS-5N is peeling tester with 5N capacity. It is specialized for peeling test of embossed carrier tape complying with IEC and JIS standard.

Standards

  • IEC 60286-3 (2013) [Packaging of components for automatic handling] (corresponding part only)
  • JIS C0806-3 (2014) [Packaging of components for automatic handling] (corresponding part only)

Accurate Graphing

It captures rapid force change due to its high sampling rate (2000Hz) thus ensures high repeatability

 

Automatic Recording 

Automatic recording, graphing and saving data when testing

 

One-click operation

Simply press the START button to start the test. It peels the sample to the set stroke (peel length)

Visual analysis

Overlays Max. 5 graphs to allow easy comparison and visual analysis. Automatically calculates Max/Min/Ave values of each graph and shows them in the same table

 

Force Recorder Standard Software

p

Specifications

Japan Model IPTS-5N
US Model  IPTS-1
Capacity  5N
Resolution  0.001N
Accuracy  +/-0.2%F.S. +/-1digit
Overload Approx.150% F.S
(It warns with warning buzzer and light flashing when the force is over 110% of capacity.)
Sampling rate  Max.2000 data / sec (2000Hz)
Test speed  120, 200, 300, 500, 1000, 1500mm/min (Switchable)
Stroke (length)  Travel of load cell: Approx. 400mm (Peel length: Approx.200mm)
Peel angle  165°-180° (Height and angle are adjustable.)
Max. sample width  Adhesion: 88mm (Film clip: 40mm, Sample clip: 95mm)
Max. sample thickness  Cover film: 0.5mm
Safety device  Emergency stop button, Overload prevention (Valid only when the power is ON) (*1)
Power  AC100 to 240V free input (*2)
Weight  Approx. 11kg
Operating environment  Temperature: 0 to 40°C Humidity: 20 to 80%RH
Accessories  Force Recorder Standard (graphing software), USB cable, Power cable, Film clip, Inspection certificate, Instruction manual

*1 It does not guarantee complete protection against overload.
*2 Please specify the voltage when you order. (Accessory varies depending on voltage.)

p

Software Specifications

Data transferring speed  Max. 2000 data / sec (2000Hz)
Recording data point  Max. 7.2 million
Graph  Graph overlaying function, Capture function, Graph scaling, Statistics output, Point marking
Graph recording  Trigger function
Edit  Comment, Add notes, Borderline function
Output  Printing (A4, letter size), CSV, Word, Excel, PDF
OS  Windows 7/8/8.1/10
Hardware CPU: Pentium4 (1GHz or more) or more is recommended
Memory: 2GB or more is recommended
Hard disk (data storage area): 10GB or more is recommended
Plat form  NET Framework4.6 or later
Execute environment  Microsoft Internet Explorer 6 or later
Windows installer 3.1 or later
Image size  Resolution 1024×768 pixel or more
Connection port  USB1.1, USB2.0 connecor
* Operation in USB 3.0 has not been varified.

* Some old versions of Excel show data up to 65,531 only

1

Dimensions