MTDI Hot Mounting Specimen Mold Press ETOS-300 Series (Multi Molds)
ETOS-300 series Hot Multi Molds Mounting Press for Metallography Metallurgy Testing and Sample Preparation for Analysis. Presented by MSP Metrology (M) Sdn Bhd from MTDI Korea
Features
ETOS-300
Multiple Molds Hot Mounting Specimen Mold Press
ETOS-300 with multiple molds slot able to mount the irregular shape specimen to regular shape specimen for effectiveness and stable specimen treatment. Materials should have to resistance on Pressure and High-heat.
Multiple Molds Available
ETOS-300 is a machine capable of forming multiple channels simultaneously. It is possible to automatically control the cylinder position by installing a hydraulic cylinder position sensor.
Easy to use
ETOS-300 helps to mount the irregular shape specimen to regular shape specimen for analysis of samples material. Most commonly used in testing laboratory, it is one of the most important machine in sample preparation process.
Easy Operation
Fast operation using Touch Screen and button. Information such as molding status, temperature, and pressure is displayed through the 15” TFT LCD touch screen, and multi-channel simultaneous control is possible.
Advantages
- Fast mounting available by Cylinder and Heater casted closely
- Prevent Noise and Mounting performance increased by Accumulator
- Preheat function decrease mounting time
- Pressure remove automatically after mounting
- 15″ TFT Touch LCD screen helps easy control and check status
- Prompt control by Touch button
- Prevent damage from the fall of cap by Mold Cap Rack
- Emergency Stop button for spontaneous situation
- Limit set for Temperature and Pressure
- Prevent overheat inside by Blower
- Prompt control by Manual button
- Bottom Ram position control by Position sensor (Cleaning, Set specimen, choose cap position)
- Cooling system which satisfy Time and Temperature
Specifications
| Model no. | ETOS-300 |
| Usage | Automatic Multi-channel Hot Mounting Press |
| Power | AC220V, Single phase, 50~60Hz, 7.5~11kW (Multi channel available) |
| Size (mm) | 1410 (W) x 800 (D) x 1550 (H) |
| Mold Size | 25 ~ 50mm Dia. , User Selection (40, 50 Option) |
| Input Type | Auto Hydraulic, Pump (Max 3,000psi/210Bar) |
| Cooling | Auto Cooling(Water) with Solenoid valve / Fan Cooling(Air) |
| Temperature | Max 220℃ (Limit 210℃) |
| Safety | E-stop button, Limit of Temperature and Pressure |
| Controls | Power, Start, Stop, Cylinder control |
