Attonic Standard Type Force Gauge Push-Pull Tester AP Series
Force Gauge Push-Pull Tester Type with reinforced plastic body, small measuring instrument that can endure long-time measurement by MSP Metrology (M) Sdn Bhd from Attonic Japan.
Features
- For load tests of electronic parts, car parts, polymers, plastics, electric cords, rubber, etc.
- This load tester provides you with quick and accurate data for more efficient quality control and assembly.
Warranty
- Two years warranty for only AP-series
Example Of Test Use
- Operation power test of a switch
- Strength test of solder
- Opening and closing power test of a door
- Destructive test op plastic etc
Full Specifications
Model | Greates measured value | Minimum scale value | Accuracy | Stroke | Weight | Note |
AP-1 | 1Kg / 10N | 5g / 0.05N | ± 0.2% of full-scale | 10mm | About 650g | |
AP-2 | 2Kg / 20N | 10g / 0.1N | ||||
AP-3 | 3Kg / 30N | 10g / 0.1N | ||||
AP-5 | 5Kg / 50N | 20g / 0.2N | ||||
AP-10 | 10Kg / 100N | 50g / 0.05N | ||||
AP-20 | 20Kg / 200N | 100g / 1N | ||||
AP-30 | 30Kg / 300N | 100g / 1N | ||||
AP-50 | 50Kg / 500N | 200g / 2N |